FlockYou Display | ALPR Awareness Detector with 2” IPS Screen
FlockYou Display | ALPR Awareness Detector with 2” IPS Screen
Before You Order
- Device: M5Stack Basic with a 2-inch IPS display, speaker and physical buttons.
- Power: Integrated 110mAh rechargeable battery and USB-C connection; charge before use.
- Detection: Supported 2.4 GHz Wi-Fi signatures associated with Flock/ALPR equipment.
Detection limits: Supported wireless signatures must be observable within range. A device can go undetected; no alert does not establish that an area is free of surveillance equipment.
Hardware Platform
Processor
ESP32-D0WDQ6-V3 dual-core 32-bit processor operating up to 240 MHz
Wireless
2.4 GHz Wi-Fi
Display
2-inch IPS color TFT LCD
320 × 240 resolution
Up to 853-nit rated maximum brightness
Memory
16MB Flash
520KB SRAM
Audio
Integrated 1W speaker
Controls
Three physical programmable buttons
Battery
Integrated 110mAh rechargeable lithium battery
Connectivity
USB Type-C
HY2.0-4P interface
M5-Bus expansion interface
Expansion
15 broken-out I/O pins
M5Stack module support
Grove expansion support
Dimensions
54 × 54 × 17 mm
Weight
Approximately 49.5g
Privacy Awareness Without a Subscription
FlockYou Display combines a larger screen, audible alerts, physical controls, and open-source FlockYou firmware in a compact ESP32 platform.
It is designed for people who want more information on the device itself while keeping the system portable and straightforward.
For source code, documentation, firmware development, and technical information, visit the official STS Collective FlockYou ESP32 Project.
Setup guides and downloads
Download your free PDF guide for setup, power requirements, troubleshooting and documentation links. Save a copy for offline reference.
Project documentation
Use the instructions for your exact hardware and installed firmware version. Setup help: support@stscollective.com.
Original project, developer, and DIY resources
- Original project developer and source: Original FlockYou project by Colonel Panic
- Original documentation and DIY guide: FlockYou project guide
These links identify the upstream project, its documentation, and available self-installation or reprogramming information. STS Collective provides prepared hardware for customers who prefer not to assemble or flash a device themselves.
Hardware, firmware, compatibility, testing, and support
- Hardware: FlockYou Display | ALPR Awareness Detector with 2” IPS Screen
- Firmware: FlockYou is the firmware or software path identified above. The listing states that the image is installed or preloaded.
- Compatibility: Review the hardware, power, operating system, software, accessory, and regional requirements stated above before ordering.
- Testing: This listing does not promise individual pre-shipment testing. Contact support before ordering if you need a specific verification.
- Setup and DIY: Use the project, setup, and DIY references already included in this description. Follow the guide for the exact hardware and firmware. Project or setup documentation 1 Project or setup documentation 2 Project or setup documentation 3
- Support: Contact support@stscollective.com for setup and product questions.
- Lawful use: Use only on hardware, networks, cards, radio bands, and systems you own or have explicit permission to test. Follow applicable laws, platform rules, privacy rules, and radio regulations. Do not access, copy, interfere with, or disrupt other people's systems.
DIY flashing option
Flashing your own compatible device is usually manageable when you follow the project guide. STS Collective provides a ready-to-use flashed device for customers who prefer convenience. You do not need to buy a flashed unit to use the project.
Use the guide for your exact board and selected firmware:
- FlockYou project and flashing guide
- FlockYou project and flashing guide
- FlockYou project and flashing guide
Confirm the board revision, firmware target, power requirements, and current release before flashing. Reflashing replaces the installed firmware and may erase settings.
Hardware origin, packaging, and firmware
This listing uses standard off-the-shelf OEM hardware from the original hardware manufacturer. STS Collective is not the hardware manufacturer. The hardware supplied matches the hardware shown in this listing.
STS Collective develops and flashes STS firmware, or flashes firmware from the original developer identified below. Your order is packaged to represent the physical hardware, not the firmware. When original packaging is supplied, it is OEM packaging for the hardware model. Fulfillment handling sometimes removes original packaging or uses other shipping packaging. Packaging does not identify the firmware developer.
Firmware developer
- FlockYou: SimeonOnSecurity developed the installed firmware with sponsorship from STS Collective. The upstream Flock-You project was created by Colonel Panic.
STS Collective flashes the identified firmware before shipment. The installed firmware does not change the source or manufacturer of the physical hardware.